Battery Li-Po 11.1V/1500 mAH 20/40C VB Power
In stock
- Product code
- 11612
Get a free sticker with every order if you add it to the cart!


Description / Battery Li-Po 11.1V/1500 mAH 20/40C VB Power
Battery Li-Po 11.1V/1500 mAH 20/40C VB Power
Li-Po batteries are characterized by a positive capacity-to-weight ratio and a low self-discharge rate, which makes them advantageous to use.
Airsoft guns powered by this type of energy source will operate more efficiently and for longer periods of time compared to traditional batteries.
Weight: 110 g
Length: 180 mm
Width: 17 mm
Height: 23 mm
Plug: Deans
Capacity: 1500 mAh
Voltage: 11.1 V
ATTENTION!
* Use ONLY chargers compatible with lithium batteries.
* Charge using the balancer option. It is preferable to use this option at least every 5 charging cycles.
* DO NOT leave the battery without supervision when it is charging.
* DO NOT use broken batteries.
* Avoid prolonged charging, it can cause battery damage.
* Do not use the batteries as soon as you notice something wrong.(eg leakage, color change, deformation or swelling).
* To avoid the probability of electric shock first unplug the charger.
During usage of LiPo batteries, remember the following:
* DO NOT exceed the maximum discharge power. For example, a battery with a 2100 mAh capacity and 15C means that the maximum discharge power can take the value of: 15x2100 mAh = 31500 mAh = 31,5A.
* DO NOT discharge the batteries below 3 volts per cell. Under 3 volts chemical reactions start, and the cells lose their capacity to store or charge.
* To avoid an excessive cells discharging is advisable to use a LiPo alarm. When the limit voltage level per cell will be reached, the LiPo alarm will sound a warning tone.
When storage LiPo batteries remember to:
* Store them partially charged.
* Avoid leaving discharged battery. It can cause battery damage.
* Optimal temperature during storage is 12 Celsius degrees.
* Disconnect battery after each usage.
WARNING! Disconnect batteries when storing the electric rifles! The airsoft rifles that have mosfets mounted, will discharge the battery under the minimum voltage of 3V / cell causing battery damage.
NOTE! Batteries are covered only by the original functioning warranty.
More Information
| Product code | 11612 |
|---|---|
| Acumulator type | Li-Po |
| Connector Type | Deans (T-Plug) |
| Battery Voltage | 11.1V |
| Manufacturer / Brand | VB Power |
Reviews (1)
Customer Reviews
recommend this product