Laser-Cut Helmet Accessory Pouch 8FIELDS Multicam

The 8FIELDS Laser-Cut helmet accessory pouch is designed to carry and organize equipment mounted directly on the helmet. The polyester construction, created using laser-cutting technology, allows it to be secured to the helmet’s surface with Velcro and helps organize accessories or cables.

The model consists of a central strap that runs along the top rim of the helmet and two side panels, each measuring approximately 90 x 55 mm. The Velcro surfaces allow for the attachment of identification patches or other compatible accessories.

The central strap has a Velcro surface along its entire length and is equipped with an elastic cord with a stopper, useful for securing an additional accessory, such as an identification light. The side panels are connected by sewn-in elastic strips, which allow for routing cables for fans or other helmet-mounted accessories.

On the back is a universal pocket, suitable for a night vision device battery, a counterweight, or an anti-fog system. The pocket is approximately 90 mm long, 80 mm high, and 30 mm wide, and can accommodate items up to approximately 40 mm wide thanks to the elastic material.

Sewn-in elastic straps run along the sides of the rear pocket, helping to organize cables between the back and front of the helmet. These straps keep the cables close to the helmet and minimize their movement during use.