Battery Li-Po 1000mAh 7.4V 20-40C 8Fields Deans

Connector: Deans
Weight: 150 g
Length: 175 mm
Width: 11 mm
Height: 16 mm
Capacity: 1000 mAh
Voltage: 7.4 V

WARNING!

Use only a power supply designed for LiPo batteries.
It is recommended to use a power supply with a battery balancer.
Do not leave the battery charging unattended.
Do not use damaged batteries.
Avoid prolonged charging, as it may damage the battery.
Stop using the batteries immediately if you notice anything unusual (e.g., leakage, discoloration, deformation, or swelling).
To avoid the risk of electric shock, disconnect the power supply first.

Important notes when using LiPo batteries:
*Do not exceed the maximum discharge current. For example, for a LiPo battery with a capacity of 2100 mAh and a 15C rating, the maximum discharge current is: 15 × 2100 mAh = 31,500 mAh = 31.5 A.
*Do not discharge the LiPo battery below 3V per cell; below this value, the battery loses its ability to recharge.
*To avoid over-discharging the LiPo battery, it is recommended to use a LiPo alarm: when the minimum voltage is reached, the alarm will emit a warning sound.

Important notes regarding the storage of LiPo batteries:
* Store batteries partially charged.
* Avoid storing batteries in a discharged state, as this can lead to damage.
* The optimal storage temperature is 12 degrees Celsius.
* Disconnect the battery after each use.

WARNING! Batteries are covered only by the initial performance warranty.
WARNING! When storing replicas, the batteries must be disconnected! Replicas equipped with MOSFETs discharge the battery below the minimum voltage of 3V per cell, causing battery damage.