Silencer CNC Viper 180 x 40 mm with barrel extension

CNC Viper Suppressor 180 x 40 mm with AirsoftPro Barrel Extension

The fully metal CNC Viper suppressor with barrel extension is mainly used on airsoft rifles as an aesthetic accessory, but it can also be filled with baffles to reduce noise when firing.

The Viper suppressor is manufactured by precision CNC machining from durable 6061T6 aluminum alloy. As a result, the suppressor is lightweight (only 165 g) and at the same time very durable. Additionally, the matte finish is scratch-resistant.

The model is extremely versatile due to the numerous ways of mounting it on the gun. The suppressor package includes 3 types of caps and a barrel extension that allows for multiple mounting options:

1. It can be mounted classically, using the rear cap of the suppressor (14 mm CCW thread) on the adapter or the end of the rifle barrel. The rear cap also has two holes for easier tightening.

The suppressor can be filled with noise-reducing baffles/foam (40 mm diameter) to reduce noise. These are not included in the package.

2. However, screwing onto the end of the barrel will often lengthen the rifle. Therefore, you can use another mounting method that will improve the rifle's appearance without increasing its length, using the two additional caps in the package. Each cap has a different internal hole (20/31 mm) with rubber sealing rings. Depending on the width of the rifle's outer barrel, the rear cap of the suppressor can be replaced and adjusted.

The suppressor is mounted onto the barrel or adapter at the point of the front cap, which has a 14 mm CCW thread inside. The rear cap of the suppressor then holds the suppressor axially to the barrel using the tight-fitting rings.

3. The 11.8 cm external barrel extension included in the package can also be used in this way. It is mounted on the front cap, thus increasing the space for the inner barrel by the length of the extension.

Weight: 165 g
Colour: Negru
Material: Aluminiu
Dimensions: 180 x 40 mm
Filet: 14 mm CCW

The package includes: CNC Viper Suppressor 180 x 40 mm, 1x barrel extension, 1x set with 2 caps, 1x set with 3 O-rings.

The O-rings and barrel extension are located inside the suppressor.