Microprocessor charger with balancer for LiPo / LiFe / NiMH batteries

Weight: 110 g

Dimensions: 100x35x80 mm

Universal charger with an easy-to-use microprocessor, equipped with a balancer, for batteries consisting of 2-3 Li-Po cells or 1-8 NiMH cells.
Due to the quality construction, the charging process is stable, and the microprocessor supervises the selection of the appropriate voltage and current. Thanks to this fact, the battery will never be overcharged and will keep its factory parameters for a long period of time.

The charger has three diodes that indicate the operating mode.
By pressing once, choose the type of battery. To start charging, press and hold the key for 3 seconds.
During charging, the LED flashes, when charging is complete, the LED is permanently on.
The rapid flashing of the LED indicates a malfunction, disconnect the charger from the power source and check the correctness of the connections and the condition of the battery itself.

The charger does not have the option of loading two packages at the same time!

Characteristics:

• Suitable for LiPo/LiFe batteries (2 to 3 cells) and NiMH batteries (1 to 8 cells);
• It has the function of automatically maintaining the voltage in the battery;
• Powered by electricity from 100V - 240V;
• It is characterized by a power of 25W and a charging current of up to 3A.
• Status indication: charging: red, fully charged: green, Error: flashing red.

The package includes: power supply, adapter for connecting a NiMH battery.

NOTE! The power supply is designed for indoor use only. Do not leave the charger unattended during charging.
NOTE! The feeder must be positioned horizontally and operate in well-ventilated conditions, avoid water and keep away from inflammable explosive goods.
NOTE! Do not cover the power supply during charging, the ambient temperature must not exceed 30°C.
NOTE! Do not leave charged batteries on flammable surfaces, wooden surfaces or carpet.
NOTE! Turn off the power supply before connecting or disconnecting the battery charger.
NOTE! Do not try to disassemble the charger, high voltage inside, danger!